LiveDOPE Data Card
Run the card yourself
This is the Data Card's screen, working the way the real card does. Connect the virtual wind meter, change the wind and the air, drop the phone, go dark in Ghost mode, and watch every target's hold follow along, once a second.
Stage
S1 · 4 targets S2 · 10 targets
Wind meter virtual Kestrel
Connected Disconnected
Can't connect: Ghost mode keeps the card's radio off. Nothing is transmitted, so the card won't search for or connect to a meter.
Wind on the range
Coming from
Wind behavior
Steady Gusty Switchy
Wind set on the card used with no meter
Low
High
From
Air
Temperature
Card
Wind shown as
Low / high Live Average
Wind window
10 s 30 s 60 s
Low / high shows the lowest and highest crosswind in this many seconds. Average uses the mean wind over the same time.
Live hold
On Color Wind bar Off
The hold to use right now, big on the right of each row. Color adds green while the wind is steady and amber while it is building or easing, with an arrow showing which.
Screen
Night Sun NV
Rifle level
On Off
Counts as level within
0.3° 0.5° 1°
A bubble level like the one on your scope. Green: level. Blue: bubble left of level. Red: bubble right. The arrows show which way to roll the rifle, and the screen's frame takes the same colour.
Phone
Connected Away
Can't connect: Ghost mode keeps the card's radio off.
Connected, the phone solves every target and sends live holds each second. Away, the card works the holds out itself.
Ghost mode
Off On
For non-permissive environments: the card restarts with its radio never switched on. No Bluetooth, no phone, no meter, no signal to intercept or direction-find. The card's built-in sensors take over temperature, humidity and pressure. On the real card it can only be turned off on the card itself.
A simulation for illustration: holds for a 6.5 Creedmoor 140 gr ELD-M at about 1,000 ft, worked out ahead of time, with a simulated wind meter. Do not use these numbers to shoot.
Join the waitlist
